LCC-Consensus Pump E100-SS
Single piston pump featuring process controlled DC drive. Self-flushing head.
Flowrate may be set from the touch sensitive front panel. Can be controlled either by Line in (0-10Volts, 0-20 mA) or RS232 Interface. Compatible with any system.
Dimensions(HxWxD): 158 mm x 125 mm x 330 mm (6,2" x 4,9" x 12.9" )
Available as Stainless Steel or as PEEK Polymer pump heads.
Flowrates range / Pressure range
0.1 -    5 ml/ min =  200 bar (3000 psi)
0.2 -  10 ml/ min = 100 bar (1500 psi)
0.4 -  20 ml/ min =   50 bar (730 psi)
2.0 -  50 ml/ min =   25 bar (370 psi)
5.0 - 100 ml/ min =    10 bar  (150 psi)

LCC-Consensus HPLC Pump R 200
High pressure, double head piston pumps for HPLC, MPLC, reciprocal piston movement for SFE and constant flow  applications.
Pump heads Sapphire/Ceramic Valves seat and piston Valve balls = Ruby
Heads = SS 1.4571, PEEK or Titanium
Seal = Spring supported PTFE
Pressure Indication: in bar (3 digits )
Pressure limits : min. / max. adjustable Electronics: Flow ratio control: via change of refs. /min
Control in puts: Analog 0 -10 V DC, 0 – 20 mA RS232 (Optional RS485)
Out put: Pressure: 0 – 10V DC, Flow ratio: 0 – 10V DC Warning signal
Dimensions: W=225mm, H=225mm, D=510mm
Power: 100 –230 V, 50/60 Hz
Flow rate ranges:
R200SS-50= 0.5–50ml/min 4500 psi/300 bar R200SS-100= 1-100ml/min 3000 psi/200 bar R200SS-200= 2-200ml/min 1500 psi/100 bar R200SS-400= 4-400ml/min 750 psi/50 bar
R200SS-600= 6-600ml/min 600 psi/40 bar
R200SS-700= 7-700ml/min 375 psi/25 bar
R200SS-1000= 10-1000ml/min 375 psi/25 bar
 

LCC-Consensus HPLC Pump R 300
High pressure, double head piston pumps for HPLC, MPLC, SFE and constant flow  applications.
Pump heads Sapphire/Ceramic Valves seat and piston Valve balls = Ruby
Heads = SS 1.4571, PEEK or Titanium
Seal = Spring supported PTFE
Pressure Indication: in bar (3 digits )
Pressure limits : min. / max. adjustable Electronics:
Flow ratio control: via change of refs. /min
Control in puts: Analog 0 -10 V DC, 0 – 20 mA RS232 (Optional RS485)
Out put: Pressure: 0 – 10V DC, Flow ratio: 0 – 10V DC Warning signal
Dimensions: W=225mm, H=225mm, D=510mm
Power: 100 –230 V, 50/60 Hz
Flow rate ranges :
R300SS-50= 0.5–50ml/min 4500 psi/300 bar
R300SS-100= 1-100ml/min 4500 psi/300 bar
R300SS-200= 2-200ml/min 3000 psi/200 bar
R300SS-400= 4-400ml/min 1500 psi/100 bar

LCC-Consensus HPLC Pump HD 400
High pressure, double head piston pumps for HPLC, MPLC, SFE and constant flow  applications.
Pump heads= SS 1.4571, PEEK or Titanium
Piston= Sapphire/Ceramic
Valve balls = Ruby Heads
Seal = Spring supported PTFE
Pressure Indication: in bar (3 digits ) Pressure limits : min. / max.
Flow ratio control: via change of refs. /min
Control in puts: Analog 0 -10 V DC, 0 – 20 mA RS232 (Optional RS485)
Out put: Pressure: 0 – 10V DC, Flow ratio: 0 – 10V DC Warning signal
Dimensions: W=225mm, H=155mm, D=510mm Power: 100 –230 V, 50/60 Hz
Flow rate ranges :
R400SS-10= 0.1-10ml/min 6000 psi/400 bar
R400SS-50= 0.5–50ml/min 3000 psi/200 bar
R400SS-100= 5-100ml/min 750 psi/50 bar
R400SS-200= 10-200ml/min 375 psi/25 bar

LCC Consensus P10 SS Pump
Ten pistons parallel pump featuring process controlled DC drive.
Self-flushing head.
Flowrate may be set from the touch sensitive front panel.
Can be controlled either by Line in (0-10Volts, 0-20 mA) or RS232 Interface. Compatible with any system.
Available as Stainless Steel or as PEEK pump head version.
Flowrates range / Pressure range
0.1 -    5 ml/ min /head =  200 bar (3000 psi)
0.2 -  10 ml/ min /head = 100 bar (1500 psi)
0.4 -  20 ml/ min /head =   50 bar (730 psi)
2.0 -  50 ml/ min /head =   25 bar (370 psi)
5.0 - 100 ml/ min /head =    10 bar  (150 psi)