Home » Shop » Syringe Pumps

Syringe Pumps

Category:

Description

Syringe Pumps

Syringe Pumps are used for very precise volumes dosing in a wide range of applications such as Diagnostic manufacture or sample injections etc.  Most pumps are custom built to specific applications ranging from nano, micro, and ml dosing.

Consensus Syringe Pumps dose with extremely high accuracy and pulsation-free from ml, ul down to nl range.

In simple words, a syringe pump is one or many syringes. The piston is connected with a stepper motor that moveth the plunger without vibration. Thus the liquid to be delivered exudes extremely smoothly.

Syringes can also be exchanged with sterilizable and chemically inert  glass syringes or Polymer-based syringes

Consensus Syringe Pumps are for a wide range of challenging applications in research, industry, and development, There are applications in the field of flow chemistry, in-vitro diagnostics, micro-reactions equipment, and microfluidics. They all depend on pulsation-free performance in the creation of fluid streams. This is because small flow rates in the nanoliter range require utmost precision and incredibly smooth operation. When using our syringe pumps, you can rely on highly accurate mechanical components, enabling continuous processes, improved product quality, production flexibility, and cost-effectiveness.

 Consensus syringe pumps are used with the following application:

  1. Dosing of reaction solutions for screening applications and miniaturized syntheses in microfluidics

2. Highly accurate fluid dosing and creation of minimal, precisely defined fluid streams

3.  Various lab-on-chip applications, such as DNA amplification (PCR chip)

4. Creation of micro-serial sample flows in high-throughput applications

5. Dosing of reagents with periodical gradients for the creation of compartment sequences with variable concentration of ingredients (creation of parameter spaces, e.g. inactive agent research

6. Infusing calibrant into a mass spectrometer or reaction chamber.

7. Long term drug infusions to animals and general infusion applications.

Consensus Nano Pump

The Consensus NanoPump pumps liquids in a precise, uniform flow without fluctuations. This is made possible by the control of two independent syringe drives.

While one syringe is dispensing liquid, the other syringe is preparing for the next stroke. This way a seamless transition is guaranteed. The flow is therefore pulsation-free. Inlet and outlet valves are positively controlled and the pump is self-priming.
Depending on the pair of syringes installed, the flow rates cover areas from 84 nanoliters per minute to 75 milliliters per minute.
Finite dosages are also part of continuous delivery. This is achieved with three parameters: 1. Flow rate,  2. Volume and 3. Dosing time.

The Consensus NanoPumpi can be controlled and monitored via the RS232 interface as well as with analog and TTL signals.

In the basic version, Windows software used to operate the Pump

For standalone operation, there is a PDA controller with a touchscreen available.

In addition to the function as a pump, each syringe drive can be controlled individually. This enables many applications of liquid handling in research, development, production, and process engineering.
Components that come in contact with the medium is based on glass, PTFE, and Kel-F.

Scope of delivery:

Consensus Nano Pump with valves (but without syringes), Windows software, RS232 cable, power supply (110-230V), mains cable.

Technical specifications
Delivery range: 83.3 nl / min  to 75 ml / min
Funding mode continuously or
at last
The specifications flow rate in nl / min
Dosing volume in µl dosing time in
seconds
Pressure range 0 – 6 bar
Accuracy better than 1%
Reproducibility better than 1%
Nano Pump Mini
The NanoPump-Mini pumps liquids in a precise, uniform flow without fluctuations. This is made possible by the control of two independent syringe drives.
While one syringe is dispensing liquid, the other syringe is preparing for the next stroke, so that there is a seamless transition
is guaranteed. The flow is therefore pulsation-free. Inlet and outlet valves are positively controlled and the pump is self-priming.
Depending on the pair of syringes installed, the flow rates cover areas
from 84 nanoliters per minute to 75 milliliters per minute. Except
Finite dosages are also part of the continuous delivery
possible in which of the three parameters (flow rate, volume and
Dosing time) two. The NanoPump-Mini can
be controlled and monitored via the RS232 interface as well as with analog and TTL signals.
In the basic version, Windows software is used to operate the
Pump included. For standalone operation, there is an option
PDA controller with a touchscreen available.
In addition to the function as a pump, each syringe drive can be controlled individually. This enables many applications of liquid handling in research, development, production, and process engineering
to realize. PTFE, Kel-F, and. Come into contact with the medium
Glass.
Scope of delivery: NanoPump-Mini with valves (without syringes), Windows software, RS232 cable, power supply (110-230V), mains cable.
Control of RS232 interface
I / O port for analog or
TTL signals
Syringe volume 5 µl – 12.5 ml
Full stroke time 10 – 3600 seconds
24 V / DC supply
Dimensions W × H × D 160 × 120 × 160 mm
Weight about 3 kg

Specials Pumps